TECHNICAL SPECIFICATIONS

• Floodlight for accent lighting composed of 36 LED.
• First brand Led (Rebel Color - RGB) mounted on a pressed aluminum circuit, highly heat-dissipating MCPCB (Metal Core Printed Circuit Board).
• Cable plate complete with easily replaceable electronic unit. A Surge Protection Device, in common and differential mode till 10kV, is also included.
• Optic group easily replaceable.
• Floodlight complete with infrared photocell recipient.
• Power supply cable through a PG 13,5 cable gland IP68.
• Input and output signal cable with two cable gland PG 11, IP68.
• Power supply 220 - 240V / 50 - 60 Hz VAC.
• Power correction factor > 0.9.
• Insulation class I.
• Overall protection degree: IP67.
• Protection degree against external impacts: IK08
• CE Certification.
• All the electric components are ENEC certified.
• Construction norms in compliance with EN 60598-1, EN 60598-2-5.

PROTECTION AGAINST SURGES

• CL I: up to 10kV.

CLASS OF PHOTOBIOLOGICAL RISK

• Risk group exempt from this according to EN 62471.

MATERIALS AND FITTINGS

• Body and cover in die-cast alluminium with the primary alloy.
• Coated in silver-colored polyester powders (RAL 9006).
• Bracket made of galvanized steel painted in Silver color (RAL 9006).
• Gaskets in anti-aging rubber.
• Extra-clear tempered glass, 4mm thick.
• External screws in stainless steel.

OPERATION CHARACTERISTICS

• Dimmable with remote control.
• Stand alone operation.
• 16 colours already set up that cover the entire visible spectrum.
• 4 light programs already set up.
• Light intensity: dimmable at 25-50-75-100% of flux.

“EASY DMX CONTROL” OPERATION

• On the electronic board inside the product, there are 12 dip switches: the "master" unit, monitored by remote control, has been set with the dip switches from 1 to 10 in the OFF position and the dip switches 11 and 12 in the ON position .
• To convert the floodlight into the "slave" mode, the dip switches from 1 to 9 must be set in OFF position and the dip switches 10, 11 and 12 in ON position.
• It is possible to connect up to a maximum of 30 "slave" units to each "master " unit via the signal cable provided by Fael. The maximum distance between the first and the last unit is equal to 200 m. At the end of the series of devices need to attach a "terminator" provided by Fael .
• During the installation of several units, it's necessary to pay close attention to the protection of the signal cable: - mechanical protection; - protection against atmospheric agents.
• All the signal cable connections have to be protected by IP 68 boxes and internally resinated.
• Do not install the floodlights and the connection boxes in areas where it is possible an accumulation of water.