Catalogue-
LEDMASTER 3 is the high efficiency floodlight for the professional lighting of big areas. The versatility of this powerful floodlight, make it suitable in several application: sport facilities, even with HD television coverage, large and industrial areas such as sea ports, terminal docks, container storage, railway yards and airport aprons, guaranteeing high visual comfort and maximum glare control.
-
MATERIALS AND FINISHES
- Body, rear cover and glass frame in die-cast aluminum with minimum EN 47100 title with low content copper and high resistance to atmospheric agents.
- Internal driver configuration: electronic power source, mounted on cable plates easily replaceable, complete with “Plug and Play” anti-inversion system.
- On board external drivers configuration: IP67 electronic power sources, mounted externally to the body.
- Coated in silver-colored polyester powders (RAL 9006) resistant to UV rays according to ASTM D4587:2011 standard and to corrosion according to EN ISO 9227:2017 - Salt spray tests, with a minimum duration of exposure of 2500 hours.
- Pressure compensation filter in Teflon.
- Gaskets in anti-aging rubber.
- Extra-clear tempered glass protection screen, 5mm thick.
- Stainless steel external captive screws.
- Hot deep galvanized steel fixing bracket.
- Aluminium visor for asymmetrical version, painted in silver-colored polyester powders (RAL 9006).
MECHANICAL CHARACTERISTICS
- Opening provides access to optics and cable box in a single and easy step by using two solid stainless screws.
PROTECTION AGAINST SURGES
- CL I: up to 10kV, both in common and differential mode as in the gear box there’s a Surge Protection Device (SPD).
POWER SUPPLY CHARACTERISTICS
- Power supply unit consisting of a programmable driver with a lifespan greater than 100,000h and only 10% of failure rate.
- Electronic power supply with integrated thermal protection with high efficiency and durability intended for external use. All versions are protected against overloads and surges to protect components and LEDs.
- Total harmonic distortion (THD) 20% at full load.
- LED driver with thermal protection and short circuit protection.
- Power supply cables accesses the device through a PG 16 cable gland (IP68)
- Power correction factor at full load > 0.9.
- Power supply 220 - 240V / 50 - 60 Hz VAC.
- Cable plate complete with easily replaceable electronic unit.
ELECTRICAL CONFIGURATIONS
The floodlight is available in two different electrical configurations designed with the aim of ensuring maximum flexibility to adapt to any possible situation of installation.
WITH INTERNAL DRIVERS
The internal wiring version includes drivers mounted on cable plates easily replaceable, complete with “Plug and Play” anti-inversion system.WITH ON BOARD EXTERNAL DRIVERS
The on board external wiring version provides IP67 driver mounted externally to the body. -
- HP optic: symmetric optic designed in-house in six different beams, in order to offer a solution that would meet different illumination needs.
- Available optics:
- Optics from S1 to S5: with metallized vacuum aluminium reflectors, with high efficiency and durability.
- Optic S6: of aluminum reflectors with purest silver layer. - Optic group easily replaceable.
- Optic group protected by extra-clear tempered glass protection screen, 5mm thick.
- Thermal dissipation system by means of cross-sectional cooling fins placed on the cover.
- Multichip LED technology on a pressed aluminum circuit, highly heatdissipating MCPCB (Metal Core Printed Circuit Board).
- Color temperature (tolerance ±400K): 5000K – CRI >70. On request, different color temperatures and CRI are available.
MAINTENED AVERAGE LUMINOUS FLUX ACCORDING TO LM80 - TM21 STANDARDS
>100.000 hr L80B10 >50.000 hr L90B10 >50.000 hr L80B10 Operating temperature for floodlights ta* 35°: -40°C ÷ +40°C
ta* 50°: -40°C ÷ +55°C* the “ta” abbreviation (= ambient temperature) indicates the maximum ambient temperature when the floodlights works in normal conditions. This indication does not exclude temporary operation of the floodlights at the indicated operating temperatures.
HP OPTIC:
Based on the reflection concept, the HP OPTIC consists of thermoplastic material metallized vacuum reflectors or aluminum reflectors with purest silver layer. The optic comes with different beams, in order to offer a solution that would meet different illumination needs ensuring high visual comfort and maximizing glare control:
S1 2x6°
S2 2x9°
S3x11°
S4 2x13°
S5 2x15,5°
S6 2x35°- Asymmetric optic designed inhouse in four different beams in order to offer a solution that would meet different illumination needs.
- Available optics:
- FLEXO HP: optic A1-A2-A4, with tech polymer metallized vacuum reflectors.
- SILVER HP: A3 optic, with aluminum reflectors with purest silver layer. - Maximum intensity: 52°.
- Maximum intensity with visor: 60°.
- Optic group easily replaceable.
- Optic group protected by extra-clear tempered glass protection screen, 5mm thick.
- Thermal dissipation system by means of cross-sectional cooling fins placed on the cover.
- Multichip LED technology on a pressed aluminum circuit, highly heatdissipating MCPCB (Metal Core Printed Circuit Board).
- Color temperature (tolerance ±400K): 5000K – CRI >70. On request, different color temperatures and CRI are available.
MAINTENED AVERAGE LUMINOUS FLUX ACCORDING TO LM80 - TM21 STANDARDS
>100.000 hr L80B10 >50.000 hr L90B10 >50.000 hr L80B10 Operating temperature for floodlights ta* 35°: -40°C ÷ +40°C
ta* 50°: -40°C ÷ +55°C* the “ta” abbreviation (= ambient temperature) indicates the maximum ambient temperature when the floodlights works in normal conditions. This indication does not exclude temporary operation of the floodlights at the indicated operating temperatures.
HP FLEXO OPTIC
The FLEXO HP optical system is based on the principle of adding photometric distribution as each LED is associated with a specific design that generates a precise light distribution. The optic is divided into three different beams (A1/ A2/ A4) in order to meet the different lighting needs, ensuring high visual comfort and maximizing glare control.
SILVER HP OPTIC
Based on the principle of reflection, the SILVER HP OPTIC consists of aluminum reflectors with a layer of pure silver. The optic has an A3 beam, ensuring high visual comfort and maximizing glare control. -
Dimensions Internal driver On board external drivers Max weight* 22,50 kg 23,40 kg Exposed surface - tilt 0° lateral; 0,095 m2 / front: 0,230 m2 lateral; 0,110 m2 / front: 0,270 m2 * Weight tolerance ± 5%
To download the dxf/dwg files, please register and get access to the reserved area -
-
OPTIONS FOR LIGHT CONTROL
- DALI 2: digital dimming interface via DALI 2 protocol.
-
To download the dxf/dwg files, please register and get access to the reserved area
Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868
Fael Spa | P. IVA IT 11966710151 | Informativa Privacy | Informativa sui cookie | Credits
Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868
Fael Spa | P. IVA IT 11966710151 | Privacy Policy | Cookie Policy | Credits
Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868
Fael Spa | P. IVA IT 11966710151 | Política de privacidad | Cookie | Credits
Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868
Fael Spa | P. IVA IT 11966710151 | Politique de confidentialité | Politique de Cookie | Credits
Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868
Fael Spa | P. IVA IT 11966710151 | Datenschutzrichtlinie | Cookie-Politik | Credits