What do you want to illuminate today?

Use our configurator and find the Fael illuminating body best suited to your ideas

DOMINO PARK

    The DOMINO PARK Series, a new frontier in lighting, is the new and highly efficient solution for professional lighting of urban areas. The exceptional application flexibility of this versatile lighting system allows it’s use in specifically complex urban environments like parking lots, wide avenues just like narrow alleys, parks and gardens with special bike and pedestrian roads or in large and small plazas.


  • TECHNICAL SPECIFICATIONS

    • Urban floodlight, on die-cast alluminium “V“ shaped support in black color galvanized steel for pole installations.
    • Singlechip LED Technology on a pressed aluminum circuit, highly dissipating MCPCB (Metal Core Printed Circuit Board).
    • Color temperature: 4000K - CRI >70.
    • High efficiency electronic power source and duration, intended for external use. All versions are protected against overloads and surges to protect components and LEDs.
    • On request, it’s possible to integrate the Dali system or the 1:10V system for the remote control.
    • The system, both in CL I and in CL II, is equipped with a knife switch to interrupt the power supply at the device’s opening.
    • Cable plate complete with easily replaceable electronic unit with “Plug and Play” anti-inversion system.
    • Pressure compensation filter in Teflon.
    • Opening provides access to optics and cable box in a single, easy step by using the stainless steel screws.
    • To prevent accidental closure of the cover during assembly and maintenance, the device is equipped with an automatic anti-closing mechanism.
    • Power supply cable with an IP68 sealed fast connector: thus is not necessary open the streetlight with an overall protection degree of IP66.
    • Power supply 220 - 240V / 50 - 60 Hz VAC.
    • Power correction factor > 0.9.
    • Insulation class I and II.
    • Overall protection degree: IP66.
    • Protection degree against external impacts: IK09.
    • CE certification.
    • All the electric components are ENEC certified.
    • Construction norms in compliance with EN 60598-1, EN 60598-2-3.

    PROTECTION AGAINST SURGES

    • CL I: up to 10kV both in common and differential mode.
    • CL II: up to 10kV in common mode, 6kV in differential mode.

    CLASS OF PHOTOBIOLOGICAL RISK

    • Risk group exempt from this according to EN 62471.

    MATERIALS AND FITTINGS

    • Body and cover in die-cast alluminium, with wide cooling fins.
    • Coated in black-colored polyester powders (RAL 9005).
    • Die-cast alluminium “V” shaped support painted in black color (RAL 9005) for pole installation.
    • Device locking system on pole by means of two grub screws in stainless steel.
    • Gaskets in anti-aging rubber.
    • Extra-clear tempered glass, 4mm thick.
    • External stainless steel screws.

  • OPTICAL SYSTEM
    SAFE-PARK® optic, multilayer type, designed and patented inhouse to guarantee an high level of uniformity even in the unlikely event of individual LED failure. The glare effect, typical of the individual to point emission sources, is dramatically reduced.

     

    Refraction optic system:

    The refraction of the light is obtained by means of appropriate lenses for each single LED. The material used for the lenses is of first choice with significant optical properties and highly resistant to the optical and thermal decline over time.

    Available optic:

    • C1 Optic: circular light distribution, for accent lighting.

     

    Mixed refraction/reflection optic system:

    The refraction of the light is obtained by means of appropriate lenses for each single LED. The material used for the lenses is of first choice with significant optical properties and highly resistant to the optical and thermal decline over time.

    The light reflection is obtained with aluminum reflectors (99.99% of purity) highly efficient, allowing to optimize the lighting project.

    Available optics:

    • 2 x L10/ 2 x L20 Optics: square light distribution, with differents width of frontal emission.

     

    CUT-OFF emissions with zero-impact when the floodlight is installed with the glass parallel to the ground.

    For the illumination of carriageways with special geometric structures, please contact Fael LUCE headquarter.

     

    APPLICATIONS

    Parks and green areas.


  • Dimensions
    Max weight 10,00 kg
    Wind exposed surface lateral: 0,060 m2
    front: 0,081 m2
    Installation pole installation with die-cast alluminium “V” shaped support painted in black color.
    Ø 46 mm ÷ 60 mm
    Installation height 3 ÷ 12 m

    To download the dxf/dwg files, please register and get access to the reserved area

  • To download the dxf/dwg files, please register and get access to the reserved area

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Informativa Privacy | Informativa sui cookie | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Privacy Policy | Cookie Policy | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Política de privacidad | Cookie | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Politique de confidentialité | Politique de Cookie | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Datenschutzrichtlinie | Cookie-Politik | Credits

We use technical cookies and third party cookies to improve our services. By continuing to browse, you agree to the use of cookies.
For further information or to find out how to change your settings and block cookies, please see our privacy policy.