What do you want to illuminate today?

Use our configurator and find the Fael illuminating body best suited to your ideas

DOMINO STREET RC/RD

Catalogue

EcoDesign

The DOMINO STREET RD/RC series offers to the public administrations a complete solution providing quality light with elements of urban décor. The different positioning of the “V” support with respect to the center of the urban floodlight allows a wide application versatility. Combined with the different optics available, the luminaire can be placed in different contexts, such as on roads flanked by cycle paths or parallel roads with a median application.
MATERIALS AND FINISHES
- Body and cover in die-cast aluminum with minimum EN 47100 title with low content copper and high resistance to atmospheric agents.
- Upper cover with cross-sectional cooling fins with highly aesthetic aspect.
- Die-cast aluminium “V” shaped support in black color (RAL 9005) for pole installation.
- Device locking system on pole by means of two grub screws in stainless steel.
- Coated in silver-colored polyester powders (RAL 9006) resistant to UV rays according to ASTM D4587:2011 standard and to corrosion according to EN ISO 9227:2017 - Salt spray tests, with a minimum duration of exposure of 2500 hours.
- Pressure compensation filter in Teflon.
- Gaskets in anti-aging rubber, removable.
- Extra-clear tempered safety glass protection screen, 4mm thick.
- Stainless steel external captive screws.
- Stainless steel closure clip.
MECHANICAL CHARACTERISTICS
- Replacement of the entire LED module including the upper cover.
- Opening provides access to optics and cable box in a single, easy step by using the quick release clip in stainless steel, without using additional tools.
- To prevent accidental closure of the cover during assembly and maintenance, the device is equipped with an automatic anti-closing mechanism.
PROTECTION AGAINST SURGES
- CL I: up to 10kV both common and differential mode.
- CL II: up to 10 kV common mode, differential mode 6kV. On request it is possible to reach 10kV also in differential mode with SPD connected between phase and neutral.
POWER SUPPLY CHARACTERISTICS
- Power supply unit consisting of a programmable driver with a lifespan greater than 100,000h.
- Electronic power supply with integrated thermal protection with high efficiency and durability intended for external use. All versions are protected against overloads and surges to protect components and LEDs.
- The system, both in CL I and in CL II, is equipped with a knife switch to interrupt the power supply at the device’s opening.
- Power supply cable with an IP68 sealed fast connector: thus is not necessary open the streetlight with an overall protection degree of IP66.
- Power correction factor at full load > 0.9.
- Power supply 220 - 240V / 50 - 60 Hz VAC.
- Cable plate complete with easily replaceable electronic unit.
- 1-10V: analog dimming interface via 1-10V protocol.

SAFEWAY® optic system: refraction/reflection system and refraction system.
Optic group easily replaceable.
Multi-die, Singlechip e Multichip LED Technology on a pressed aluminum circuit, highly dissipating MCPCB (Metal Core Printed Circuit Board).
Thermal dissipation system by means of cross-sectional cooling fins.
Color temperature: 4000K - CRI>70. The streetlights are available on request also with color temperatures between 2700 and 5700K.

MAINTENED AVERAGE LUMINOUS FLUX ACCORDING TO LM80 - TM21 STANDARDS

>100.000 hr	L90B10
Operating temperature for luminaires	ta* 35°: -40°C ÷ +40°C ta* 50°: -40°C ÷ +55°C

* the “ta” abbreviation (= ambient temperature) indicates the maximum ambient temperature when the luminaire works in normal conditions. This indication does not exclude temporary operation of the luminaire at the indicated operating temperatures.

OPTIC SYSTEM REFRACTION/REFLECTION

	AB1 OPTIC: Street optic normally used for all street illumination categories, especially when the installation height and the carriage width ratio is greater than 0.85. This optic is particularly suitable for roads with a relationship between the poles distance and the installation height even higher than 4.
	AB1+C OPTIC: Mixed street optic with bilateral emission, normally used in parallel street lighting with median application. Designed to illuminate roads of different categories and sizes or urban roads combined with cycle or pedestrian paths. The optic is composed of two different semi-optics, each suitable to light different road geometry.
	2xL5 OPTIC: Rectangular emission optics normally used for parallel roads with median application or in parks, gardens, car parks or other areas where the use of symmetrical optics is recommended, albeit with different symmetry with respect to the area to be illuminated. In such applications, these optics are used as an alternative to rotosymmetrical optics, because they are able to better cover the area to be illuminated.

SYSTEM REFRACTION

	S OPTIC: Street optic normally used for lighting categories up to M3. This optic is particularly suitable for situations where the installation height and the width of the carriageway ratio is less than 1. It is also appropriate for roads with very high interdistances and an interdistance / installation height ratio greater than 5.
	V OPTIC: Street optic normally used for lighting categories up to M3. This optic is particularly suitable for situations where the installation height and the width of the carriageway ratio is less than 1.

Dimensions

Max weight* 10 kg

Wind exposed surface with tilt 0° lateral: 0,060 m² / front 0,081 m²

* Weight tolerance ± 5%

To download the dxf/dwg files, please register and get access to the reserved area

Dimensions
Max weight*	10 kg
Wind exposed surface with tilt 0°	lateral: 0,060 m² / front 0,081 m²

The luminaires should not be installed above sources of heat.

Installation	Domino street RD	Domino street RC
Installation	Die-cast aluminium “V” shaped support painted in black color (RAL 9005) for pole installation.
	decentral position of the “V” shaped support with respect to the lighting device	central position of the “V” shaped support with respect the urban floodlight
Pole diameter	Ø 46 mm ÷ 60 mm
Installation height	3 ÷ 16 m

OPTIONS FOR LIGHT CONTROL
- Automatic dimming through virtual midnight system with customized profiles according to specific needs.
- CLO functionality: the driver can be programmed to gradually increase the level of drive current fed to the LEDs in order to compensate their physiological lifespan reduction.
- Astronomical clock: this function the system to be switched on and off according to certain preset time slots.
- DALI 2: digital dimming interface via DALI 2 protocol.
- Adjustment of the luminous flux through conveyed waves.
- Main voltage dimming: this function allows the variation of the luminous flux by acting on the variation of the power supply voltage supplied by the control panel of the lighting system.
- NEMA SOCKET: 7 pins (ANSI C136.41).
- ZHAGA SOCKET: 4 pins (ZHAGA Book 18).
To download the dxf/dwg files, please register and get access to the reserved area