What do you want to illuminate today?

Use our configurator and find the Fael illuminating body best suited to your ideas

DOMINO WORK

Catalogue

EcoDesign

Lighweight, versatility and efficiency make the DOMINO WORK highbay the main ally in industrial and commercial contexts. The Glare-Free© optics create a comfortable working environment, with perfect visibility that allows workers to carry out their tasks in complete safety.
MATERIALS AND FINISHES
- Body and cover in die-cast aluminum with minimum EN 47100 title with low content copper and high resistance to atmospheric agents.
- Coated in silver-colored polyester powders (RAL 9006) resistant to UV rays according to ASTM D4587:2011 standard and to corrosion according to EN ISO 9227:2017 - Salt spray tests, with a minimum duration of exposure of 2500 hours.
- Black color (RAL 9005) available on request.
- Gaskets in anti-aging rubber, removable.
- Extra-clear tempered safety glass protection screen, 4mm thick, with aesthetic Silvercolored serigraph (RAL 9006).
- Stainless steel external captive screws.
MECHANICAL CHARACTERISTICS
- Opening provides access to optics and cable box in a single, easy step by using the stainless steel screws.
- To prevent accidental closure of the cover during assembly and maintenance, the device is equipped with an automatic anti-closing mechanism.
PROTECTION AGAINST SURGES
- In common mode: 10kV.
- In differential mode: 6kV.
- On request it is possible to reach 10kV also in differential mode with SPD connected between phase and neutral.
POWER SUPPLY CHARACTERISTICS
- Power supply unit consisting of a programmable driver with a lifespan greater than 100,000h.
- Electronic power supply with integrated thermal protection with high efficiency and durability intended for external use. All versions are protected against overloads and surges to protect components and LEDs.
- Power supply cable through a PG 13,5 cable gland IP68.
- Power correction factor at full load > 0.9.
- Power supply 220 - 240V / 50 - 60 Hz VAC.
- Cable plate complete with easily replaceable electronic unit with “Plug and Play” anti-inversion system.
- Glare-Free© roto-symmetrical optical system available in two different beams (MB/WB).
  - WB OPTIC: for installation height from 4 to 14m.
  - MB OPTIC: for installation height from 5 to 20 m.
- Optic group easily replaceable.
- LED technology placed on an highly thermical heat-dissipating plate.
- Thermal dissipation system by means of cross-sectional cooling fins.
- Color temperature: 4000K - CRI > 80.
Other color temperatures and color rendering indexes are available on request. The table below shows the multipliers to obtain the luminous flux according to the color temperature and the color rendering index (CRI).

Colour temperature (°K) and CRI Multiplier

4000K - CRI > 80 1

5000K - CRI > 80 1,01

4000K - CRI > 70 1,05

5000K - CRI > 70 1,07

MAINTENED AVERAGE LUMINOUS FLUX ACCORDING TO LM80 - TM21 STANDARDS

>85.000 hr L80

Operating temperature for luminaires ta* 35°: -40°C ÷ +40°C
ta* 50°: -40°C ÷ +55°C

* the “ta” abbreviation (= ambient temperature) indicates the maximum ambient temperature when the luminaire works in normal conditions. This indication does not exclude temporary operation of the luminaire at the indicated operating temperatures.
Dimensions

Max weight* 7,80 kg

* Weight tolerance ± 5%

To download the dxf/dwg files, please register and get access to the reserved area
The luminaires should not be installed above sources of heat.

Installation

Installation with suspension eyebolts for installation with cables or chains

Installation height up to 25 m
OPTIONS FOR LIGHT CONTROL
- CLO functionality: the driver can be programmed to gradually increase the level of drive current fed to the LEDs in order to compensate the physiological light reduction of the LEDs.
- 1-10V: analog dimming interface via 1-10V protocol.
- DALI 2: digital dimming interface via DALI 2 protocol.
To download the dxf/dwg files, please register and get access to the reserved area