What do you want to illuminate today?

Use our configurator and find the Fael illuminating body best suited to your ideas

TREND 4 WAY LED

    The extreme compactness of LED together with efficiency of its technology makes it possible to create what had not been possible before. The series TREND 4 WAY LED projected by Fael LUCE, becomes most indicated choice, able to conduct longterm durable components, ensuring best safety within cities and significant energy costs saving, through every architectural demand.


    ENEC
    CE
    Made in Italy
  • TECHNICAL SPECIFICATIONS

    • Streetlight.
    • Singlechip e Multichip LED Technology on a pressed aluminum circuit, highly dissipating MCPCB (Metal Core Printed Circuit Board).
    • Color temperature: 4000K - CRI>70.
    • High efficiency electronic power source and duration, intended for external use. All versions are protected against overloads and surges to protect components and LEDs.
    • The system, both in CL I and in CL II, is equipped with a knife switch to interrupt the power supply at the device’s opening.
    • Cable plate complete with easily replaceable electronic unit.
    • Replacement of the entire LED module including the upper cover.
    • Pressure compensation filter in Teflon.
    • Power supply cable with an IP68 sealed fast connector: thus is not necessary open the streetlight with an overall protection degree of IP66.
    • Opening provides access to optics and cable box in a single, easy step by using two solid stainless screws.
    • Power supply 220 - 240V / 50 - 60 Hz VAC and also available in 120-277V / 50-60 Hz VAC.
    • Power correction factor > 0.9.
    • Insulation class I and II.
    • Overall protection degree: IP66.
    • Protection degree against external impacts: IK08
    • CE certification.
    • ENEC approval: the laboratory tests were conducted at an ambient temperature of + 35°C and the endurance test at + 45°C. Normally the streetlights are approved by conducting tests at an ambient temperature of + 25°C.
    • Construction norms in compliance with EN 60598-1, EN 60598-2-3.

    PROTECTION AGAINST SURGES

    • CL I: up to 10kV, both in common and differential mode.
    • CL II: up to 10kV in common mode, 6kV in differential mode.

    CLASS OF PHOTOBIOLOGICAL RISK

    • Risk group exempt from this according to EN 62471.

    MATERIALS AND FITTINGS

    • Body and cover in die cast aluminum.
    • Adjustable pole mounting system in die cast aluminium.
    • Coated in silver-colored polyester powders (RAL 9006).
    • Gaskets in anti-aging rubber.
    • Extra-clear tempered glass, 4mm thick.
    • External screws in stainless steel.

  • Mixed refraction/ reflection optic system:

    The refraction of the light is obtained by means of appropriate lenses for each single LED. The material used for the lenses is of first choice with significant optical properties and highly resistant to the optical and thermal decline over time.

    The light reflection is obtained with aluminum refllectors (99.99% of purity) highly efficient, allowing to optimize the lighting project.

    Available optics:

    • AB1 Optic: for carriageway with a width greater than 0.85 times the height of installation; suitable for large and highspeed roadways.
    • B1 Optic: for carriageway with a width equal to or less than 0.85 times the height of installation, suitable for urban roads, car parks and bike paths.

    CUT-OFF emissions with zero-impact when the floodlight is installed with the glass parallel to the ground.
    For the illumination of carriageways with special geometric structures, please contact Fael LUCE headquarter.


  • Dimensions
    Floodlight weight 10,00 Kg
    Surface wind resistance with tilt 0° lateral: 0,077 m2
    front: 0,049 m2
    Tilt - adjustable tilt at a constant step of
    Installation  on pole / with accessory Ø 60 or 76 mm to be ordered separately
    To download the dxf/dwg files, please register and get access to the reserved area
  • To download the dxf/dwg files, please register and get access to the reserved area

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Informativa Privacy | Informativa sui cookie | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Privacy Policy | Cookie Policy | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Política de privacidad | Cookie | Credits

Fael Spa | P. IVA IT 11966710151 | Politique de confidentialité | Politique de Cookie | Credits

Fael Spa
Via Euripide 12/14
20864 Agrate Brianza (MB) Italy
p. +39 039 63411
f. +39 039 653868

Fael Spa | P. IVA IT 11966710151 | Datenschutzrichtlinie | Cookie-Politik | Credits

We use technical cookies and third party cookies to improve our services. By continuing to browse, you agree to the use of cookies.
For further information or to find out how to change your settings and block cookies, please see our privacy policy.