|
Waterproof remote control gear box Class I for lamp up to 2000W
IP 65
 Die cast aluminium alloy body.
Cover made by printed aluminium sheet.
Estractable plate made by steel coated with passivated zinc, for clamp of the complete control gear only for 1000 W.
Control gear box: 230V - 50Hz, for 1000W lamps 400V - 50 Hz for 2000W lamps.
Anti-ageing gasket in silicon rubber.
Line entry hole with cablejoint PG 16.
Going out hole cutted screw with cable-joint PG 16.
Body and cover are coated with polyester powders in black/silver colour.
Waterproof remote control gear box Class II for 1000W and 2000W metal halide lamp
IP 66
Body and cover in special thermoplastic material, high thermal resistant and high resistant to air pollution.
Line entry hole with cable gland PG 16.
Output lamp hole with cable gland PG 16.
The gear box is complete with ballast and capacitor.
Power supply 230V 50Hz for 1000W lamps 400V 50Hz for 2000W lamps.
Suitable for 1000W and 2000W luminaires in Class II.
Nylon screw terminal clamps 4 mmq.
The mounting distances between the gear box and the body can be up to 50/70 meters, as the ignitor is fitted inside the rear housing of the luminaire.
|
|
 |
Download technical data (format PDF)
|
|
|
|
Dimensions
|
|
 |
|
