|
Asymmetrical floodlight for discharge lamp 2000W/400V
IP 66
 The LIGHTMASTER 2000 floodlight is the result of high level research made by our designers and engineers seeking an advanced professional sports lighting system, sports hall, large indoor sports areas, events and shows in large open areas. The projectors are suitable for installation on masts and line arrangements at heights up to 50/70 meters above and around the surface area. The compact body, low weight and new design concept, offer the minimum levels of wind resistance also the use of smaller masts. This is the perfect solution for stadium design.
Insulation class I. The impact test is 7 J.
Lamps
Suitable lamps are double ended Metal Halide both Osram and Philips type, short and long arc.
Technical specifications
Body, rear cover and glass frame, in die cast aluminium, with primary alloy and low copper content (major 0,1%) with an high weather proof rating coated with silver polyester powder.
Front tempered glass resistant to high temperatures and to thermal shock.
Anti-ageing gaskets in silicon rubber.
Hot deep galvanized sheet steel fixing bracket.
Connection box in special selfextinguish plastic material, complete with ignitor.
CABLO SERVICE box, may be used for the supply of the lamp. The mounting distances between the gear box and the body can be up to 50/70 meters, as the ignitor is fitted within the rear housing of the projector.
Lamp mounting and replacement
The lamp is located by opening the rear cover, the cover is opened by releasing two strong stainless steel quick release clips.
When the rear cover is opened the power is automatically disconnected.
The projector is supplied in two versions:
- with two power resistant knife switches. When the cover is opened, the remote control switch disconnects the power supply.
- with one security resistant knife switches. For this version it is compulsory to connect a remote control switch to the poles of the terminal block inside the connection box. When the cover is opened, the remote control switch disconnects the power supply.
Lamp replacement is achieved by opening the cover housing at an angle of 110°.
Aiming
The aiming is achieved with a mechanical sighting device (a protractor scale, attached to the side of the unit and indicating the angle of tilt, can be used for pre-aiming) or for more precise aiming, a telescope 6x36 can be mounted on the sighting device (available as an optional extra).
Optical system
The asymmetrical projector, is supplied with two types of optics.
- Peened with a wide beam with or without flux reflector skin
- Specular with a narrow beam with or without flux reflector skin.
A careful study permits excellent control of the luminous flux and a considerable glare reduction. An accurate reproduction of the light distribution pattern is guaranteed by the two-point fixing of the transversely positioned lamp.
 |
Accessories
|
|
 |
| CODE |
DESCRIPTION |
|
| 60286 |
Grille |
|
| 60288 |
Safety steel grid |
|
| 60287 |
Louvre |
|
| 10240 |
Osram lamp short arc 5800K |
|
| 10236 |
Sylvania lamp short arc 5600K |
|
| 10239 |
Osram lamp long arc 4100K |
|
| 10235 |
Philips lamp long arc 4200K |
|
| 10236 |
Philips lamp long arc 5600K |
|
| 07130 |
5kV-400V ignitor |
|
| 06901 |
Ballast |
|
| 05145 |
Capacitor 60 µF 450V |
|
|
|
|
|
|
Download technical data
|
|
|
|
Dimensions
|
|
|
|
Photometric data
|
|
 |
|
