|
Street lighting insulation Class I - II
IP 55 Optical assembly
IP 23 Electrical Accessorieses
 Cover made of polypropylene with mineral filler; stabilized against U.V., grey colour.
Hinged opening without the use of tools, locked in the closed position by two steel retaining clips.
Body in die cast aluminium coated with polyester powders in black colour.
Reflector made of a highly pure (99.8%) aluminium pressed sheet, polished and oxidized, semi cut-off light out put. Nondegenerative rubber gasket.
Refractor made of high transparency boroslilicate glass with inner and outer differentiated prismatic surface supported by a frame made of aluminium alloy complete with non-degenerative rubber gasket and retaining screw.
Extraction of the lamp from the hinder part of the reflector with a screwed plug device on which the lampholder is mounted.
Porcelain lampholder, with focusing device.
Device for line interruption on fitting's opening for maintenance pourposes (only for Class II).
Bronze syntered filter positioned on lampholder support.
Prearrangement for the application of a photo cell.
Prearrangement for mounting a mains fuse (only for Class II).
Installation on 60-85 mm dia, top entry pole and 45-65 mm dia, side The control gear plate, made out for Class II of injection of thermoplastic material and for Class I of a galvanized steel sheet, is complete with connectors which allow its quick disassembly during maintenance operations.
All the electrical components are produced according to the Italian Quality Standards for power 230V - 50 Hz and the street lighting is manufactured according to EN 60598/1 rules.
 |
Accessorieses
|
|
 |
| CODE |
DESCRIPTION |
|
| 60031 |
Corner bracket composite |
|
| 60030 |
Wall bracket composite |
|
| 60026 |
Wall bracket electro welded |
|
| 60063 |
Corner bracket electro welded |
|
|
|
|
|
|
Download technical data (format PDF)
|
|
|
|
Dimensions
|
|
|
|
Photometric data
|
|
 |
|
