|
High bay fitting for internal environment with fixed focal position
IP 20
 Body made of zinc plated steel sheet coated with polyester powders in black colour and white colour on request.
Installation by suspension hook.
Side cable entry with cable gland PG 13,5.
Porcelain lampholder, which can be counted in two positions: with and without spacer.
Electrical components easily accessible. The reflectors are made of highly pure aluminium with diapered surface, polished and anodized finish.
Special optics for tubolar and ellipsoidal lamps.
Optional spacer for wide beam (see photometric data).
For metal halide lamps the fitting may be used only with protection glass.
Two versions for Philips type metal halide ellipsoidal lamps HPI 250 and 400W BU Plus, have been created. When powered by a high pressure sodium ballast emit a considerable higher quantity of light. The 250 W emits 23,500 lumens against 19,000 of the standard version; the 400W emits 40,000 lumens against 35,000 of the standard version.
These bulbs also supply a warmer tone of light passing from 4300 K degrees to 3800 degrees K.
All the electrical components are produced according to the Italian Quality Standards for power 230V - 50 Hz and the high bay is manufactured according to EN 60598/1 rules.
 |
Accessories
|
|
 |
| CODE |
DESCRIPTON |
|
| 60357 |
Glass |
|
| 60360 |
Grille |
|
| 60354 |
Antivibrations support |
|
| 60356 |
Spacer |
|
|
|
|
|
|
Download technical data (format PDF)
|
|
|
|
Dimensions
|
|
|
|
Photometric data
|
|
 |
|
