|
Indoor high bay
IP 23
 The Body made of zinc plated steel coated with polyester powders in silver colour, wired power corrected.
For power S 400W the body is manufactured with cooling ribs.
Fitting supplied completely wired power corrected and packed in a single box containing, for the Q and M-S versions, the wired body and the reflector.
The reflector is made of highly pure alluminium for an high luminous performance.
Installation by suspension hook.
Side cable entry with cable gland PG. 13,5.
Porcelain lamp-holder with fixed focal position.
Electrical components easily accessible.
Special optics for ellipsoidal lamps.
All the electrical components are produced according to the Italian Quality Standards for power 230V - 50 Hz and the high bay is manufactured according to EN 60598/1 rules.
For metal halide lamps the fitting may be used only with protection glass.
Two versions for Philips type metal halide ellipsoidal lamps HPI 250 and 400W BU Plus, have been created. When powered by a high pressure sodium ballast emit a considerable higher quantity of light. The 250 W emits 23,500 lumens against 19,000 of the standard version; the 400W emits 40,000 lumens against 35,000 of the standard version.
These bulbs also supply a warmer tone of light passing from 4300 K degrees to 3800 degrees K.
 |
Accessories
|
|
 |
| CODE |
DESCRIPTON |
|
| 60357 |
Glass |
|
| 60360 |
Grille |
|
| 60354 |
Antivibrations support |
|
|
|
|
|
|
Download technical data (format PDF)
|
|
|
|
Dimensions
|
|
|
|
Photometric data
|
|
 |
|
