TECHNICAL SPECIFICATIONS

• Body and glass frame manufactured in die cast aluminum with the primary alloy with a low copper content.
• Both body and frame undergo a treatment of phosphor degreasing, phosphor chromate treatment and receive a further special protective surface covering, before they are polyester powder coated in a silver color in order to guarantee a high corrosion resistance.
• Cover hinged in the body bottom and held with stainless steel small rings.
• Lamp-holder in porcelain 18A with anti-unscrewing device.
• Installation by means of a strong steel fork, galvanized and coated with polyester powders in metallized silver color.
• Double goniometric scale for vertical mounting.
• Gaskets in anti-aging silicon rubber.
• Tempered glass suitable for high temperature thermal shocks and crashes, mechanically fixed to the glass frame.
• The power supply cable accesses the device through a PG 13.5 cable gland (IP68).
• Protection degree against external impacts: IK 08.
• Compensation filter in Teflon.
• Projector suitable for E40 metal halide lamps.
• Opening and access to optics and control gear with a single operation, by using hexagon stainless steel screws.
• Wiring board with electrical unit with improved power factor (cos > 0.90) in galvanized steel.
• The wiring board can be easily removed to make maintenance operations easier. It can be cut away from the supply line through non-reversible connectors with quick coupling.
• Designed for indoor and outdoor applications and on inflammable surfaces.
• The floodlight can be mounted directly on pole (max. 60 mm diameter). The dedicated accessories AKRON 1 and AKRON 2 allow the single or double top pole mounting. 
• All electrical components are certified with ENEC mark (230V, 50 Hz). The projector has been manufactures according to EN 60598/1 standards.